DLS HLC4.2 adaptor de nivel pe 4 canale

High level converter
Acest adaptor de nivel este conceput pentru  a se folosi in masini care nu au iesire rca pe aparatul de fabrica.
Majoritatea amplificatoarelor au high level input si functioneaza pe aparatele vechi dar nu functioneaza pe
aparatele mai noi cu iesire digitala.

Acest adaptor este facut sa functioneze cu toate aparatele de bord. Poate fi folosit pentru 2 sau 4 canale si are
iesire de 3v. Poate fi folosit pentru difuzoare amplificate sau pentru subwoofer.


Note: If using in 2 channel mode channels 1 & 2 must be connected for the signal sensing circuit to function.

Technical facts HLC4
Number of channels: 4
Power supply: 12 V DC (min 10,8, max 15,6V)
Current draw, no signal: 4 mA
Current draw, operational: Typical 25 mA
Output voltage: 3 V RMS
Distortion: 0,002% THD @ 3V output, 10 kohm load
Clip point: 3,7 V RMS @ 14,4 V power supply
Output impedance: 200 ohms nominal
Input impedance: Ch. 1: 44 ohms, Ch. 2-4: 100 ohms, All channels are fully balanced
Sensing modes: DC level or Audio, both operate on Ch. 1 only.
Remote output: 12 Volts, max 100 ma max, protected against short term short circuit
Indicators: Green= Remote on, Blue = Audio sensing active
Reverse polarity protected.Summing output ch 3 + 4 for subwoofer amp when used with optional EBC

Comenzi telefonice sau detalii produs

0735.100.200